It looks like you're new here. If you want to get involved, click one of these buttons!
News & Announcements
Offers & Requests
Win 95 install, AGAIN
The Win95 computer died. Last installed Win95 in 2016. Am getting the "not sufficient memory to run Windows) on the new one. Seems to me there's a workaround for that?
Firstly, what are the specs of this new computer?
Also to note, Win95 requires at least 4MB of RAM (although 8MB is recommended).
A similar message of "Insufficient Memory" will also show up if the system has too much memory installed. With Windows 95, the maximum amount of memory a system can access is a bit under 512 MB. Any more, it won't boot.
edited July 27
Thanks...1024 ram. Hmm-have to look and see if there's any 512 DDR 2 in the collection
Are you using RTM or OSR 2.x?
You MAY be able to work around the "too much ram" issue by adding the line
MaxPhysPage=20000 to the [386Enh] section of your system.ini file.
Windows 95 OSR 2.x (not sure about RTM) can do around 900MB by setting MaxPhysPage=3B000, or a number around there. The exact maximum can be different on different machines.
When you do this, you also should add the value MaxFileCache=65536 to the [vcache] section in the system.ini. Otherwise you may encounter an issue working with large files that causes Win95 to temporarily freeze for a few minutes.
I believe this is the workaround. am using RTM, but have an OSR 2 copy here someplace. Thank You so Much!
For Bry.. When saying "new" computer, meant new to me ;-) Intel Pentium 4 3.2Ghz, DDR2 1024MB ram, Fujitsu 4.3gig AT HDD with Win95 loaded. (from old computer)
I tried to install Win 95 on an old PC - a custom-tailered one. AMD 2400+ CPU and 2 GB RAM.
DOS 6.2, WinNT 4.0 and Win 2000 --> easy to install and they work properly.
Instead of WinNT 4.0 I tried to install Win 95b. And it showed me the finger: No enough
memory! 2GB was way too much for that old lady!
Just a clue: Win95 runs well on IP166 with 256/512 Mb RAM - no more RAM!
And once again you CAN run Windows 95 with more RAM as long as you add
"MaxPhysPage=" with a value between 20000 to 3B000 to the [386Enh] section of your system.ini file.
I'm running it right now on a KT7A with a Mobile Athlon 3000.
Of course, finding drivers for video cards and network cards is another problem.
Forum Software Powered by Vanilla